Energy & Environmental Products LLC (E2P) (formerly Jonas, Inc.).
Products Offered by E2P (formerly Jonas, Inc.)
Sampling and Injection
EPRI Isokinetic Sampling Nozzles for Gases and Liquids
Isokinetic sampling nozzles (probes) for sampling gases and liquids (including steam and water in steam plants). EPRI Nozzles meet current ASTM D1066 and D3370 requirements
Quills for injecting chemicals into liquids and gases (for example, into feedwater pipes in steam plants).
Corrosion and Deposition Monitoring Equipment
Turbine Deposit Collector / Simulator
A simple inexpensive device installed outside the turbine that collects exfoliated oxides and deposits representative of deposition inside the turbine. Used for troubleshooting, testing chemistry effects, root cause analysis of deposition in turbines, evaluation of composition and morphology, and determination of the time and type of operation when impurities are transported into the turbine.
Flow Accelerated Corrosion Simulator / Monitor
An inexpensive and compact device that allows the user to periodically obtain estimates of the FAC wear rate in their system without the need for costly inspections or outages.
Sampler for Condensing Phases (Early Condensate, First Concensate)
Used for troubleshooting corrosion and water and steam chemistry problems in steam turbines, feedwater heaters, BWR reactors, PWR steam generators, heat exchangers, piping, and geothermal systems.
Droplets carrying dissolved impurities which impact the Probe are instantly converted back to vapor leaving behind the impurities as deposits on the Probe surface. Used in corrosion investigations of disks, blades, stress corrosion cracking, corrosion fatigue, etc.
Guidelines
Customized Steam Cycle Water Chemistry Guidelines
These comprehensive Guidelines, customized for a specific unit, cover water and steam chemistry control for utilities, industrial units, and combined cycles for any type of water treatment.
Steam Cycle Water Chemistry Commissioning Guidelines
Water and Steam chemistry and corrosion control is often a neglected area during the storage, erection, and commissioning of the equipment when building new units.
Other Products
An instrument used to periodically measure the moisture (quality) content of wet steam.
An inexpensive, easy to install, in-line instrument for the continuous monitoring of steam systems. It can also be used for liquid induction for other fluids.
Reduces or prevents air inleakage through turbine rupture disk and can be installed during operation.
Nitrogen Sparging and Blanketing of Storage Tanks
Filling the boiler, deaerator, and feedwater system with deaerated water with low concentrations of oxygen and carbon dioxide leads to minimization of iron and copper oxide scale formation and corrosion, faster startups (less iron and copper holds), and lower frequency of chemical cleaning.